FAQ on Cutting Stair Stringers - AAIT

How to cut stringers ?

Before you start cutting the stringers, you first have to measure the rise and run. Later, you have to figure out the number of steps and mark the stringers. You must cut along the lines shortly after drawing them.  

How to measure and cut stair stringers?

After you have found out the number of steps, you need to cut the stair stringers using a square tool. You must begin drawing the lines as soon as you find a piece of wood. The first step is to draw the lines that indicate each step’s height. Additionally, you must mark according to the determined width.

 

How to cut stair stringers with a circular saw?

While you’re using a circular saw, you have to cut the stringers gradually. If the blade is not along the line, then you have to pull the saw back. As you come across two lines meeting at a 90 degree angle, you must stop cutting. 

How to cut stair stringers for a deck?

When you wish to cut the stair stringer for a deck, you have to measure the total rise and the run. You must draw lines shortly after figuring out how many steps there are. Ultimately, you must carefully cut along the lines.

 

What is the formula for cutting stair stringers?

There’s no specific formula for cutting the stair stringers. But, if you want to cut them, then you have to follow some steps. Initially, you have to measure the total rise, find out the number of stairs, and calculate the height of every riser. Determining the run of every step is also essential before sketching out the stringers.

What is the best way to cut stair stringers?

To cut the stair stringers in the best way, you first need to mark the steps on the stringer. In addition, you must use a circular saw to cut along the lines. But, while you’re doing so, make sure you don’t overcut. You must stop once the lines intersect.

Should stair stringers be 2×10 or 2×12?

Ideally, the stair stringers must be 2×12 and not 2×10. This is because 2×12 lumber is quite strong and it has the capability of supporting heavy loads. Many people also prefer 2×12 lumber for the stair stringers. 

What angle are stair stringers cut?

The angle at which stair stringers are cut depends on the type of stairs and their use. The most common angle for cutting residential stairs is 38 degrees. But, when you are about to set up stringers for industrial stairs, these can have a steeper angle between 40 and 70 degrees. On the other hand, the preferred angle is less for egress stairs.

Conclusion

This guide teaches you how to cut stair stringer step by step. Stringers are important parts of stairs. Accuracy matters a lot when making them. Each stage, from calculating the number of steps to the final adjustments, underscores the significance of methodical work.

Following this comprehensive guide equips both novices and seasoned builders alike with the knowledge needed to execute this task flawlessly, contributing to sturdy, secure staircases for any project.

Remember, it’s not just about crafting steps; it’s about crafting safety and reliability.

Check article for a complete understanding of cutting stair stringer

Why Choose AAIT For Stair Stringer Scaffolding?

AAIT offers a wide variety of scaffolding projects. This includes making, assembling, disassembling, testing, and keeping them in operation. Your project will be easier and faster with our all-in-one method.

Scaffold companies in Houston like AAIT offer high-quality scaffolding equipment and expertise.  AAIT has extensive experience in various types of scaffolding projects, from small residential jobs to large commercial and industrial projects. As one of the best scaffolding accessories suppliers, AAIT emphasizes safety as a top priority, with trained and certified professionals, rigorous inspection procedures, and a commitment to following all safety regulations. 

Don’t let your project hang in the balance—choose AAIT Scaffold and experience the difference!